Error messages which are send by B18 communication

Common message: %F10001

%: NAK / not acknowledge

F1: adress of control box

0001 or 01: error number. Number is a hexadecimal value has a length of 2 or 4 numbers

Error numbers:

01  PARA_UNKNOWN, unknown parameter number
02  PARA_ERR_MIN, parameter value is smaller than allowed
03  PARA_ERR_MAX, parameter value is bigger than alowed
04  VARIO_AKTIV, change of parameter value not allowed when programming/variocontrol active
05  SEWING, change of parameter value not allowed when sew active
06  UNKNOWN_COMMAND, unknown command
07  DATA_MISSING, no data after '='-sign
08  UNKNOWNHEADER, unknown header ex. 'P', 'T', 'H'
09  TEST_NOT_ENABLED, communication not enabled
0A  TEST_UNKNOWN_COMMAND_E, unknown sign after 'E'-sign for test command
0B  GET_DATA_NOT_ALOWED, It is not possible to request data
0C  SET_DATA_NOT_ALOWED, Setting data not allowed or not possible
0D  CODE, wrong code
0E  SEPARATOR_EQU, '='-sign is missing
0F  SEPARATOR_SEMI, ';'-sign is missing
10  TEACH_PROGNUM_NOTEXIST, Teachin-program number not exist
11  TEACH_NAHTNUM_NOTEXIST, Teachin-sew number not exist
12  PROGNUM_MISSING, Teachin: program number missing 
13  NAHTNUM_MISSING, Teachin: sew number missing 
14  IS_NOT_AN_FP, FP-Data was send to a non FP control
15  ACESS_DENIEDED, access not allowed, wrong code number
16  DESCRIPT_MISSING, 'X' or 'A'-sign missing
17  PARA_NOT_IN_TEACHINLIST
18  NOT_ENOUGH_SPACE     
19  TEACH_DATA_NOTEXIST  
1A  TO_MUCH_PARAMETER       
1B  SLAVE_IS_BUSY         
1C  ERRCSI_UNKNOWN_ELEM_SYSIO